This is a two-layer type. Shake the container at least 10 times before use. Use as the final step in your makeup routine. Hold the container about 15cm away from your face, close your eyes and mouth, and spray evenly over your entire face. (5-6 sprays is a guideline for the entire face. To ensure even application, quickly move the container from top to bottom while spraying. If the spray does not cover your entire face, or if you are concerned about friction from a mask or collar, apply an additional 1-2 sprays.) Press the pump all the way down with each spray for even application. After spraying, do not touch your skin and let it dry. To remove, use a cleansing product. To prevent clogging, wipe the nozzle of the spray bottle clean after use and close the cap tightly. If you will not be using it for a while, or if the mist spreads too narrowly or the contents become difficult to dispense, carefully wipe the nozzle of the spray bottle with a cloth dampened with lukewarm water. Then, spray a few times onto a tissue to check the mist spread before use. Do not inhale directly. Avoid contact with eyes; if contact occurs, rinse immediately. For hygiene reasons, do not remove the spray during use. The two layers may appear cloudy, or there may be a difference in appearance before and after mixing, but this does not affect the quality. Do not store in high or low temperature places, in direct sunlight, or in humid places. At low temperatures, the contents may become cloudy and solidify. Allow to return to room temperature and shake well before use. Continued use without shaking well may result in the inability to spray in a mist. Do not use in a room where a fan heater that draws in indoor air is in use. Some of the ingredients may be inhaled by the fan heater, causing ignition failure or extinguishing the flame.