. 3D plate and round head for versatile styling: The plates tilt forward, backward, left, and right to follow the flow of your hair for a "perfect fit". . Selectable temperature range: 80-200℃ in 13 steps (10℃ increments) to suit your hair type and desired style. . Styling product OK! Recommended for those who use styling products before ironing. . Fast heating: Double heaters that warm both upper and lower plates in approximately 25 seconds for quick start-up. . Overseas compatible: AC100-240V. . Nano ceramic coating for even heat distribution and smooth hair glide. . Negative ions to reduce static electricity. . Temperature memory function: Automatically starts up at the last used temperature, so you can use it at the same temperature without having to set it each time. . Temperature lock function: Automatically locks the temperature to prevent temperature changes during use. . Automatic power off. . Easy-to-remove plug with just a push of a lever. . Twist-resistant rotating cord. . Power supply: AC100-240V 50/60Hz. . Power consumption: 0-650W. . Cord length: 1.7m. . Switch: 1 Power switch: ON-OFF . Switch 2 ▲ button (set temperature increase) - ▼ button (set temperature decrease) . Switch 3 Opening/closing lock: OPEN-LOCK . Warm-up time: Approximately 25 seconds (time to reach 100℃ at maximum temperature setting) . Ironing surface temperature: 80-200℃ (13 levels, 10℃ increments) . Dimensions (mm): Height 35 x Width 287 x Depth 35 mm (when stored) / Height 82 x Width 287 x Depth 35 mm (when in use, plates open) . Weight: 334g How to use [Preparation before use] Before starting to use, be sure to use a hairband or similar to prevent burns, and protect your neck and shoulders with a towel or similar. 1. Dry your hair thoroughly. 2. Brush your hair to remove tangles and loose ends. 3. Divide your hair into sections and block them with hair clips. How to use 1. With the iron closed by hand, slide the opening/closing lock to OPEN (unlock). 2. Plug the power cord into an outlet. 3 Press and hold the power switch (for about 2 seconds). It will beep, and the set temperature (180℃ the first time you use it, and the last set temperature from the previous time onwards) will flash on the temperature display. 4 Press the ▲ or ▼ button to set the temperature. You can choose from 13 steps in 10℃ increments, ranging from 80 to 200℃. When the set temperature is reached, the display will change from flashing to solid, and it will beep "beep beep beep" to notify you. . About the automatic temperature lock function Approximately 5 seconds after the last operation, it will beep and the temperature setting will be locked, and "Temperature LOCK" will be displayed on the temperature display. How to release the temperature lock Press the ▼ button twice, and it will beep and released. 5 After use, press and hold the power switch (for about 2 seconds) to turn it off, and unplug the power cord from the outlet. 6 After it has completely cooled down, close the iron part by hand, slide the opening/closing lock to LOCK, and store it in a place with low humidity.