RMK Airy Touch Finishing Powder, P01

1. Open the outer lid, remove the puff, and peel off the sticker on the inner lid. 2. The inner lid rotates. Place your finger on the inner protrusion and rotate it left and right to open and close the hole. 3. With the hole open, press the puff against the container, turn the container upside down, and shake it left and right to easily absorb the powder into the puff. Glide the powder on the puff onto your skin. You can freely adjust the amount of powder dispensed by adjusting the hole orientation. 4. After use, rotate the inner lid left and right to properly close the hole. Even with the hole closed, a small amount of powder will still dispense, so be sure to place the puff on top of the inner lid and then close the outer lid. 5. To refill, use the RMK Airy Touch Finishing Powder (refill) of the same color number (sold separately). 6. If you only need the puff, use the RMK Finishing Powder Puff (sold separately). . Do not use on areas with cuts, swelling, eczema, or other abnormalities. Pay close attention to any abnormalities that may occur on your skin before use. If the cosmetics do not suit your skin, discontinue use. 1. If you experience any abnormalities such as redness, swelling, itching, irritation, discoloration (white spots, etc.), or darkening during use. 2. If any of the above abnormalities occur after direct sunlight exposure to the skin where the cosmetics were used. Continuing to use cosmetics may worsen the symptoms, so we recommend consulting a dermatologist. To prevent accidental ingestion by children or people with dementia, be careful where you store the product. Avoid contact with eyes. If contact occurs, rinse thoroughly immediately. Close the lid tightly after use. If the puff becomes dirty, gently wash it in lukewarm water with a mild detergent, rinse thoroughly, then dry with a towel and be sure to dry in the shade. Do not store in high temperatures or in direct sunlight.