(Backordered) TESCOM Negative Ion Steam Curl Iron TM452B-W (Shell White)

Equipped with moist keep mode, heat is automatically controlled each time hair is clamped. By reducing heat damage, you can style your hair while protecting moisture and preventing hair color fading. Steam function for improved styling power. Steam transfers heat more easily, improving styling power. The improved clip shape allows for even clamping from tip to tail, making it even easier to use. Can be used with styling products before ironing. Effectively eliminates frizz and waves while caring for your hair. Negative ions reduce static electricity. Reduces static electricity, which is one of the causes of hair frizz. Nano ceramic coating for smooth hair. Contains fine "nano ceramic" particles. Power supply: AC100-240V 50/60Hz Power consumption: 0-1000W Cord length: 1.7m Accessories: Quick cord band Switch 1: Power switch ON/OFF Switch 2: Temperature setting button ▲/▼ Temperature range: 100-200°C (6 levels, 20°C increments) Warm-up time: Approximately 40 seconds (time to reach 100°C at maximum temperature setting) Unit dimensions (mm) TM452B: Height 76 x Width 336 x Depth 33 mm (body only) Weight TM452B: 340 g

Before using, to prevent burns, be sure to use a hairband or similar item and protect your neck and shoulders with a towel or similar. 1. Dry your hair thoroughly. 2. Brush your hair to remove tangles and fraying. 3. Divide your hair into sections and use hair clips or similar to secure them. How to Use: 1. Grasp the water tank by the finger loop and pull it out of the main unit. 2. Moisten the felt tip, remove the water tank cap, and fill the water tank with tap water. 3. Close the water tank cap and firmly push the water tank all the way in to attach it to the main unit. 4. Plug the power cord into an outlet. 5. Press and hold the power switch (for about 2 seconds). A beep will sound and the display will show the set temperature (180°C with Moist Keep Mode disabled for first-time use; the last previous setting will be displayed from the second time onwards). 6. Press the temperature adjustment button to set the mode and temperature. Mode: Moist Keep Mode: After reaching the set temperature, the clip detects whether the clip is opened or closed and automatically controls the heat each time it clips hair. This reduces damage and preserves moisture while styling. *Continuous use of the iron may temporarily reduce the temperature of the iron, making it difficult to set. Press the ▲ and ▼ temperature setting buttons simultaneously to enable/disable Moist Keep Mode. When Moist Keep Mode is enabled, the Moist Keep Mode icon (heart icon) will light up on the display. Temperature settings are available: 100°C, 120°C, 140°C, 160°C, 180°C, and 200°C. To use steam, disable Moist Keep Mode and set the temperature within the "Steam Icon" range (140-200°C). 7 Style your hair. How to use steam (disable Moist Keep Mode, set temperature: 140-200°C): Clamp your hair between the iron and the desired point...press the water tank. 8 After use, press and hold the power switch (approximately 2 seconds) to turn it off and unplug the power cord. 9 After it has cooled completely, discard the water from the water tank, dry it thoroughly, and store it in a place with low humidity.