TESCOM Negative Ion Straight Iron TS460A-W (White)

3D fitting plates and round head allow for flexible styling. The plates tilt back and forth and side to side along the flow of your hair for a snug fit. Choose the temperature range to suit your hair type. 13 settings from 80 to 200°C (10°C increments) allow you to adjust it to suit your hair condition and the style you want to create. Styling product compatible! Can be used while caring for your hair. Recommended for those who use styling products before ironing. High-speed heat: Approximately 25 seconds. Double heater heats up the upper and lower plates for quick start-up. Suitable for overseas use. AC100-240V. Nano-ceramic coating distributes heat evenly and makes hair glide easily. Negative ions reduce static electricity. Temperature memory function: Automatically sets to the last temperature used, so you can use it at the same temperature without having to set it each time. Temperature lock function: Automatically locks the temperature and prevents temperature changes during use. Automatic power off. Easy-to-unplug plug with the push of a lever. Twist-resistant swivel cord. Power supply: AC100-240V 50/60Hz. Power consumption: 0-650W. Cord length: 1.7m. Switch: 1 Power switch: ON-OFF. Switch 2: ▲ button (increases temperature setting) - ▼ button (decreases temperature setting). Switch 3: Open/close lock: OPEN-LOCK. Start-up time: Approximately 25 seconds (time to reach 100°C at maximum temperature setting). Iron temperature: 80-200°C (13 levels, 10°C increments). Dimensions: H 35 x W 287 x D 35 mm (when stored) / H 82 x W 287 x D 35 mm (when in use, with plate open). Weight: 334g.

[Preparation before use] To prevent burns, be sure to use a hair band or similar item and protect your neck and shoulders with a towel or similar to prevent burns. 1. Dry your hair thoroughly. 2. Brush your hair to remove tangles and loose strands. 3. Divide your hair into sections and secure them with hair clips or similar. How to use: 1. With the iron closed, slide the lock to the OPEN position. 2. Plug the power cord into an outlet. 3. Press and hold the power switch (approximately 2 seconds). A beep will sound and the temperature display will flash to show the set temperature (180°C for the first use, the last set temperature from the second time onwards). 4. Press the ▲ or ▼ button to set the temperature. You can select from 13 settings in 10°C increments from 80 to 200°C. When the set temperature is reached, the display will stop flashing and remain lit, and a beep will sound to notify you. About the automatic temperature lock function: Approximately 5 seconds after the last operation, a beep will sound, the temperature setting will be locked, and "Temperature LOCK" will be displayed on the temperature display. How to unlock the temperature lock: Press the ▼ button twice and a beep will sound to unlock it. 5 After use, press and hold the power switch (for approximately 2 seconds) to turn it off, and unplug the power cord from the outlet. 6 After it has completely cooled down, slide the open/close lock to LOCK with the iron part closed by hand, and store it in a dry place.